Download the data sheets (PDF) you’re interested in here
REMONDIS Industrie Service
Company locations
The whole picture – with just a single click. Find out here where our branches are located, what services they offer and how to contact them.
REMONDIS Group locations
Discover the world of REMONDIS with its 900+ branches and associated companies in more than 30 countries across Europe, Africa, Asia and Australia.
Aerosol can transport container STB 120 disposable
Areas of use
- aerosol cans (partially full/empty)
Technical data
- type: reusable packaging
- volume: 120 litres
- dimensions (W x D x H): 375 x 385 x 810 mm
- net mass: max. 55 kg
- packaging made of conductive plastic
- possible to store aerosol cans in this box in acc. with TRbF 60 (soon to be TRBS), TRGS 510 and BGR 157
- STB 120 fulfils the definition of "box" as stipulated in Section 6.1.4, ADR
- vents have been added to ensure there is good ventilation
- with an absorbent fleece liner to retain any liquid that may be leaked
- a perforated, electrostatic dissipative liner must be placed in the container
- absorbent material is not necessary (e.g. perlite)
- aerosol cans without protective caps may be placed in the container
- no objections from recycling plants
- special provision 327; packaging instruction P207 with packaging instruction P207 with special provisions PP17 + PP87
Aerosol can transport container SP 800
Areas of use
- aerosol cans (partially full/empty)
Technical data
- type: exchangeable container
- dimensions (W x D x H): 1,200 x 1,000 x 1,235 mm
- net mass: max. 125 kg
- volume: 800 litres
- ASP container fulfils the definition of "box" as stipulated in Section 6.1.4, ADR
- vents in the lower section to ensure there is good ventilation
- a sufficient quantity of absorbent material must be placed in the container before use (do not use material that creates dust; an absorbent fleece liner is, for example, possible)
- only suitable for empty aerosol cans due to the weight restrictions
- label box with hazard label 2.1 and the inscription "UN 1950 Aerosols"
- transport is only permitted in ventilated vehicles
- special provision 327; packaging instruction P003 with special provisions PP17 + PP87; packaging instruction LP02 with special provision L2; special provision V14; sub-section 6.1.4.14
Download the data sheets (PDF) you’re interested in here
Aerosol can transport container STB 1000
Areas of use
- aerosol cans (full)
Technical data
- type: exchangeable container
- dimensions (W x D x H): 1,000 x 1,200 x 1,222 mm
- net mass: max. 552 kg
- volume: 1,000 litres
- design approved as large packaging (50A/Y)
- has the design of a wire mesh container to ensure there is good ventilation
- incl. absorbent fleece liner
- hinged panels labelled with hazard label 2.1 and the inscription "UN 1950 Aerosols" can be opened on both sides
- transport is only permitted in ventilated vehicles
- special provision 327; packaging instruction P003 with special provisions PP17 + PP87; packaging instruction LP02 with special provision L2; special provision V14; sub-section 6.1.4.14
Download the data sheets (PDF) you’re interested in here
Aerosol can transport container SAS 800
Areas of use
- aerosol cans (full)
Technical data
- type: exchangeable container
- dimensions (W x D x H): 1,200 x 1,000 x 1,235 mm
- net mass: max. 500 kg
- volume: 800 litres
- design approved as large packaging (50A/Y)
- air vents on all sides with splash water protection
- incl. absorbent fleece liner
- the container is liquid-tight up to height of 100mm
- label box with hazard label 2.1 and the inscription "UN 1950 Aerosols"
- transport is only permitted in ventilated vehicles
- special provision 327; packaging instruction P003 with special provisions PP17 + PP87; packaging instruction LP02 with special provision L2; special provision V14; sub-section 6.1.4.14
Download the data sheets (PDF) you’re interested in here
